|
Autoclave ( size 12 x 20 ) goley plus:- AUTOCLAVE SIZE : 12 X 20 WORKING PRESSURE : 18 IBL
AUTOCLAVE 12 X 20 STEAM STERLIZER ( VERTICAL ) WING NUT TYPE IS MADE OF DOUBLE CHAMBER. INNER & OUTER CHAMBER MADE OF STAINLESS STEEL. LID IS ALSO MADE OF STAINLESS STEEL. LID IS PROVIDED WITH DOUBLE SAFETY VALVE, STEAM CONTROL & PRESSURE GAUGE. THE HEATING LOAD OF AUTOCLAVE IS 3 KW
WORKING INSTRUCTIONS
ÃË Pore sufficient water to touch the surface of the inner stand in the autoclave ÃË After placing articles in the drum, tight the lid by turning the knob simultaneous ÃË Check both the safety valve for their free movement ÃË Close the steam release valve ÃË Put the autoclave on plug to main 220 volt AC ÃË The spring loaded safety valve is fixed on 18 / 19 ibl pressure. It will work automatically ÃË 2nd safety valve ( dead weight type ) has been set on 20 / 22 ibl and will work automatically, incase first safety valve fails to release the excess steam ÃË Switch electric power OFF after completion of the sterilization for the require time & open the steam release valve to release the steam until the pressure goes down to 0 pressure ÃË As soon as the pressure comes zero, then open the lid to take out the sterilized material
PRECAUTIONS ÃË CHECH THE WATER LEVEL AFTER EVERY OPERATION ÃË DO NOT HEAT THE AUTOCLAVE WITH OUT WATER ÃË ALKELINE SOLUTION / HARD WATER SHOULD NOT BE USED IN AUTOCLAVE
NOTE AFTER COMPLETION OF STERLIZATION, STEAM RELEASE VALVE MUST BE OPEN TO AVOID CREATION OF VACCUM INSIDE THE DRUM
|